{"id":1328,"date":"2020-01-02T16:05:12","date_gmt":"2020-01-02T05:05:12","guid":{"rendered":"https:\/\/jandmf.com\/?p=1328"},"modified":"2020-05-24T17:01:25","modified_gmt":"2020-05-24T07:01:25","slug":"kx3-macros","status":"publish","type":"post","link":"https:\/\/jandmf.com\/index.php\/2020\/01\/02\/kx3-macros\/","title":{"rendered":"KX3 Macros"},"content":{"rendered":"
\t\t\t

Macros in the KX3 are incredible useful. I have eight of them – a full complement. I use them to switch between using a headset, a microphone and speaker and microphone and earphones. I also use them for setting presets for voice equalisation, compression, etc.<\/p>\n

Here’s a table of the macros\u00a0 –\u00a0 KX3 Macros in PDF format<\/a> and KX3 Macros in Excel format<\/a><\/p>\n

The first five macros are assigned to PF1 and they loop back. When you get to the WSJT macro another long press of PF1 will run the DX macro. The remaining three macros are are assigned to PF2 and operate in the same round-robin fashion.<\/p>\n

If you decide to use these macros enter them in the KX3 utility from top to bottom macro one to eight.<\/p>\n

The macro codes are all in the\u00a0Elecraft Documentation<\/a> but here’s a description of my macros. The elecraft documentation is sometimes not that easy to read but all the information is there.<\/p>\n

 <\/p>\n

 <\/p>\n<\/div>\n\t\t<\/div><\/div><\/div>

Macro explanations<\/h3>\t\t\t

As promised, here\u2019s an explanation of the macros that I use. The TE directive is Transmit Equalisation and the CP directive is Compression. Please bear in mind that these two are tailored to my voice as is MG.<\/p>\n

The headset I use is the Heil Proset that I got from Elecraft when I bought my KX3. The microphone is the Elecraft MH3 hand microphone. The headphones that I use are Heil and are the same as the Proset.<\/p>\n

Right let\u2019s get to it\u2026<\/p>\n

DX macro<\/em><\/strong><\/p>\n

TE-16-16-06+00+06+12+12+09 gives me a response curve that suits my voice and the microphone element n the headset.<\/p>\n

MD2 is operating mode USB. MG010 is microphone gain = 10. CP015 is set compression to 15 which is very high but it suites my voice. You will probably need to reduce this. Experimentation is the key here. AG010 is audio gain set to 10. PC050 is to set power to 50 watts (I have a KXP100).\u00a0 SWT19 is a short press of the PRE button on the radio which toggles the preamp on and off. As the preamp will be off by the time we get back this macro we need to turn it on again.\u00a0 MN110 sets the MACRO MENU FUNCTION. SWT27 selects the macro in position 2 SWH18 is a push and hold of PF1 which assigns the selected macro to PF1. MN255 exits the MACRO MENU FUNCTION.<\/p>\n

 <\/p>\n

HEIL macro<\/em><\/strong><\/p>\n

This macro changes the transmit equalisation to values suggested in the Heilsound web site. It also increases MIC GAIN. I don\u2019t use this one much.<\/p>\n

MN110;SWT20;SWH18;MN255 enters the MACRO FUNCTION MENU and assigns the macro in position 3 to PF1 and exits the MACRO MENU FUNCTION.<\/p>\n

Elecraft macro<\/em><\/strong><\/p>\n

Again, this macro changes the transmit equalisation to suite my voice and the Elecraft MH3 microphone. It also changes the MIC GAIN and Compression.<\/p>\n

MN110;SWT28;SWH18;MN255 \u00a0enters the MACRO FUNCTION MENU and assigns the macro in position 4 to PF1 and exits the MACRO MENU FUNCTION.<\/p>\n

PSK macro<\/em><\/strong><\/p>\n

This one sets the transmit EQ to flat, sets MIC GAIN to 10, MD6 (DATA) and DT0 (sub mode A) is to set the radio to DATA A. BW0400 is filter bandwidth in 10 Hz units. Compression is zero, power is 50W and audio gain is 20. The preamp is toggled off and the string MN110;SWT21;SWH18;MN255 assigns macro 5 to PF1<\/p>\n

WSJT macro<\/em><\/strong><\/p>\n

This one is pretty much the same as the PSK macro. As everything is set up for digital mode I only needed to reduce AG (Audio Gain) to suite the WSJT software adjustment range.<\/p>\n

The string MN110;SWT19;SWH18;MN255; assigns macro\u00a0 1 to PF1.<\/p>\n

 <\/p>\n

That\u2019s the end of the PF1 macros and what follows is the PF2 macros.<\/p>\n

HSET macro<\/em><\/strong><\/p>\n

MN082 is the first part of setting MIC buttons and MP000 is a bit mask so 000 turns mic buttons OFF. The ML directive sets the monitor level. Power is set to 110W. The string MN110;SWT32;SWH26;MN255 assigns macro number 7 to PF2.<\/p>\n

MIC macro<\/em><\/strong><\/p>\n

MN082 is the first part of setting MIC buttons and MP005 is a bit mask so 005 turns mic buttons ON. The ML directive sets the monitor level. Power is set to 110W. The string MN110;SWT33;SWH26;MN255 assigns macro number 8 to PF2.<\/p>\n

M&H macro<\/em><\/strong><\/p>\n

This macro is for when I\u2019m using headphones and the Elecraft MH3 hand mic.<\/p>\n

MN082 is the first part of setting MIC buttons and MP005 is a bit mask so 005 turns mic buttons ON. The ML directive sets the monitor level. Power is set to 110W. The string MN110;SWT29;SWH26;MN255 assigns macro number 6 to PF2.<\/p>\n

 <\/p>\n

That’s the end of the description of the macros. I really, really hope that I haven’t got anything wrong that could mislead.<\/p>\n

This set of macros means that I don’t have to do anything except press PF1 or PF2 and select the macro(s) to suit the current mode or circumstances.<\/p>\n

Enjoy and have a play to make the best use of the KX3 abilities.<\/p>\n

If you find any errors or see any glaring omissions PLEASE leave a comment so I can fix it.<\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n<\/div>\n\t\t<\/div><\/div><\/div><\/div>","protected":false},"excerpt":{"rendered":"

Macros in the KX3 are incredible useful. I have eight of them – a full complement. I use them to switch between using a headset, a microphone and speaker and microphone and earphones. I also use them for setting presets for voice equalisation, compression, etc. Here’s a table of the macros\u00a0 –\u00a0 KX3 Macros in … Continue reading “KX3 Macros”<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[52],"tags":[],"class_list":["post-1328","post","type-post","status-publish","format-standard","hentry","category-radio"],"post_mailing_queue_ids":[],"_links":{"self":[{"href":"https:\/\/jandmf.com\/index.php\/wp-json\/wp\/v2\/posts\/1328","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/jandmf.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/jandmf.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/jandmf.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/jandmf.com\/index.php\/wp-json\/wp\/v2\/comments?post=1328"}],"version-history":[{"count":11,"href":"https:\/\/jandmf.com\/index.php\/wp-json\/wp\/v2\/posts\/1328\/revisions"}],"predecessor-version":[{"id":2338,"href":"https:\/\/jandmf.com\/index.php\/wp-json\/wp\/v2\/posts\/1328\/revisions\/2338"}],"wp:attachment":[{"href":"https:\/\/jandmf.com\/index.php\/wp-json\/wp\/v2\/media?parent=1328"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/jandmf.com\/index.php\/wp-json\/wp\/v2\/categories?post=1328"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/jandmf.com\/index.php\/wp-json\/wp\/v2\/tags?post=1328"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}